Bladez moby comp

image from

The Bladez Moby Comp is the highest level scooter offered from Bladez. Like its Moby siblings, the Comp features a belt reduction transmission and a reliable Tanaka engine, but this scooter also has a set of front shocks.

Like all full-size gas scooters released from Bladez this scooter is extremely rugged and worry free. With the suspension in the front and maintenance free belt transmission in the back, this scooter is arguably one of the best cruisers ever to make it to market.

Technical SpecificationsEdit

Motor = Tanaka 35 or Tanaka 40 (Japanese)

Oil mixture = 40:1

Top speed = 28 mph

Range = ??

Transmission = Bladez belt transmission

Tension system = puller bolts

Brakes = front mechanical disc brakes and rear foot brake

Wheels = billet aluminum split rim wheels

Tires = slick 10" air tires

Clutch = 78mm Centrifugal clutch

Handlebars = MX style bent

Forks = triple clamp suspension

Deck = wood

Folding = Posi-lock folding

Frame = stainless steel

Frame protection = none

Dry weight = ~30 lbs

Belt driven reduction transmissionEdit

Bladez belt transmission

The Bladez belt drive transmission

Like the other Bladez Mobys, the Comp has a simple belt transmission which connects the drive belt to the rear wheel. The double pulley, a heavy steel double gear, can be lightened to improve performance.


Bladez moby s bars

The Comp's controls.


The Comp has two braking mechanisms: the front, hand operated, mechanical disc brake and the rear, foot-pedal brake.

Front DiscEdit

The font disc brake is operated via a hand level on the handlebars which operate a bowden cable which runs down the support pole and compresses the calipers.

Rear PedalEdit

Bladez foot brake lever

The rear foot brake lever

The rear pedal brake is a simple lever which decelerates the scooter by pressing a rubber pad onto the surface of the wheel. Since this contact is made in the same area where the wheel makes contact with the road, driving conditions can drastically affect the performance of this brake. Though, under dry conditions, this brake's power is more than adequate.


The throttle is a simple finger lever which operates a bowden cable which is routed down through the support pole and deck to the carb.


The Comp was most commonly constructed in Taiwan with the final product assembled in the US.

United StatesEdit

The Comp began production in ??? and production ceased in early 2007 when BladeZ sold its rights to the brand in order to focus more on its other markets.


You'll never have to replaceEdit

The engineEdit

This scooter comes stock with a Tanaka 35 or Tanaka 40 which should last for the life of the scooter if it is properly looked after.

You may eventually have to replaceEdit

The clutch shaft and its bearingsEdit

A common point of failure for the Bladez belt transmission is the top shaft. It is constructed of a thin bar that will eventually work its way out of the bearings which hold it it place. This problem can be avoided by checking the state of the shaft's bearings often, but it is a good idea to keep a few top shafts handy in case of failure.

You should immediately replaceEdit

Nothing! This scooter is one of the most reliable ever made. Even under negligent conditions, this scooter should live a long life.

References Edit

See Also Edit